uu
If a Tire Goes Flat
u
Changing a Flat Tire
562
Han
d
lin
g the U
n
expected
1.
Place the jack under the jacking point
closest to the tire to be changed.
2.
Turn the end bracket clockwise as shown in
the image until the top of the jack contacts
the jacking point.
u
Make sure that the jacking point tab is
resting in the jack notch.
3.
Raise the vehicle, using the jack handle bar
and the jack handle, until the tire is off the
ground.
■
How to Set Up the Jack
1
How to Set Up the Jack
Do not use the jack with people or luggage in the
vehicle.
Use the jack provided in your vehicle.
Other jacks may not support the weight (“load”) or
may not fit the jacking point.
The following instructions must be followed to use
the jack safely:
•
Do not use while the engine is running.
•
Use only where the ground is firm and level.
•
Use only at the jacking points.
•
Do not get in the vehicle while using the jack.
•
Do not put anything on top of or underneath the
jack.
3
WARNING
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tire
exactly, and never get under the vehicle
when it is supported only by the jack.
Jacking Points
Jacking Point
Jack
Handle
Bar
Wheel Nut
Wrench as Jack Handle
16 US ACCORD 4D (KA KC KL)-31T2A6300.book 562 ページ 2015年7月23日 木曜日 午後5時0分
Содержание 2016 Accord
Страница 67: ...66 16 US ACCORD 4D KA KC KL 31T2A6300 book 66 ページ 2015年7月23日 木曜日 午後5時0分 I n f o r ma t i o nP r o v i d e db y ...
Страница 113: ...112 16 US ACCORD 4D KA KC KL 31T2A6300 book 112 ページ 2015年7月23日 木曜日 午後5時0分 I n f o r ma t i o nP r o v i d e db y ...
Страница 185: ...184 16 US ACCORD 4D KA KC KL 31T2A6300 book 184 ページ 2015年7月23日 木曜日 午後5時0分 I n f o r ma t i o nP r o v i d e db y ...