8
9
DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver’s seat position into memory for each remote transmitter.
Programming DPMS
Note:
A stored memory position is linked to the corresponding keyless remote (1
or 2). Each item begins to adjust when you unlock the driver’s door with the remote
and enter the vehicle.
1.
Turn
the ignition switch to
ON (II).
Shift
into Park (P)
.
2.
Adjust
your seat to the preferred
setting.
3.
Press and hold
the SET button
until you hear a beep, then release.
4.
Press and hold
the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
Paddle Modes
PADDLE SHIFTING*
(if equipped)
Manually shift your vehicle’s gears up or down. Useful for engine braking or when
driving in hilly terrain or cornering.
Pull
(-) to shift down.
Pull
(+) to shift up.
*V6 automatic transmission model only
D-Paddle Shift Mode
•
Move
the shift lever to the D position.
•
Pull
(+) or (-) to shift to a higher or lower
gear.
• The selected gear number is displayed on the
gear position indicator.
• When the vehicle’s speed is constant or when
you press the accelerator pedal, the mode
returns to automatic.
Sequential Shift Mode
•
Move
the shift lever to the S position.
•
Pull
(+) or (-) to manually shift between first
and fifth gears.
• The M indicator and selected gear number are
displayed on the gear position indicator.
•
Move
the shift lever to the D position to
cancel this mode.
11 Accord 2D TRG:ATG_NEW STYLE
8/3/2010
10:51 AM
Page 6
