To lock any passenger’s door when
getting out of the vehicle, push the
lock tab down, and close the door.
To lock the driver’s door, remove the
key from the ignition switch, and
push the lock tab down, or push the
front of the master switch, then
close the door.
With the driver’s door open and the
key in the ignition, both master door
lock switches are disabled. They are
not disabled if the driver’s door is
closed. Pushing the front of the
switch on the open passenger’s door
will lock all doors and the In-Bed
Trunk.
The lock tab on each door locks and
unlocks that door. Pulling up on the
driver’s door lock tab only unlocks
the driver’s door. To unlock the
driver’s door from the outside, turn
the key and release it. If you turn it
again, unlock all doors and the
In-Bed Trunk.
You can open or close the side
windows by using the key in the
driver’s door (see page ).
To lock all doors and the In-Bed
Trunk, push the front of the master
door lock switch on either front door,
press the lock tab down on the
driver’s door, or use the key on the
outside lock on the driver’s door. This vehicle has auto door locking/
unlocking features. See page for
how to set them.
Pushing the rear of either master
door lock switch will unlock all of the
doors and the In-Bed Trunk.
104
81
Door Locks
Lockout Prevention
Power Door Locks
80
MASTER DOOR LOCK SWITCH
LOCK TAB
０４／１２／０３ １６：２８：４７ ３１ＳＪＣ６００ ００８５
Main Menu
Table of Contents
▲
▼
