© 2004 American Honda Motor Co., Inc - All Rights Reserved.
AII 27363 (0409)
11 of 11
41. Connect the 8-pin connector from the subwoofer
harness to the subwoofer.
39. Secure the subwoofer to the subwoofer bracket
with the four screws you removed.
40. Install the subwoofer assembly to the vehicle
under the passenger’s seat bracket using the
bracket four 6 x 12 mm flange bolts.
4312091B
VEHICLE
BRACKET
PASSENGER’S
SEAT
6 x 12 mm
FLANGE BOLT
6 x 12 mm
FLANGE BOLT
SUBWOOFER
BRACKET
4315021B
SUBWOOFER
HARNESS 8-PIN
CONNECTOR
PASSENGER’S
SEAT
SUBWOOFER
4528051B
SUBWOOFER
SCREW (Reuse.)
SUBWOOFER
BRACKET
42. Check that all wire harnesses and cables are
routed properly and all connectors are plugged in.
43. Reconnect the negative cable to the battery.
44. Enter the customer’s radio anti-theft code and
reset the radio station presets.
45. Reset the clock.
46. Check the operation of the subwoofer according
to the Owner’s Manual supplied with the
subwoofer.
47. Reinstall all removed parts.
NOTE: Whenever the battery is disconnected, the
driver’s AUTO window function is disabled.
48. Start the engine. Push down on the driver’s
window switch until the window is fully open, then
hold the switch for 2 seconds or more.
49. Pull up on the driver’s window switch to close
the window completely, then hold the switch for
2 seconds or more.
50. Test the AUTO window function.
