Pull the support rod out of its clip,
and insert the end into the hole on
the left side of the hood.
Lift it up slightly to remove the
support rod from the hole. Put the
support rod back into its holding clip.
Lower the hood to about a foot (30
cm) above the fender, then let it
drop. Make sure it is securely
latched.
If the hood latch handle moves stiffly,
or if you can open the hood without
lifting the handle, the mechanism
should be cleaned and lubricated
(see page
).
3.
173
To Close the Hood
Bef ore Driving
Service Station Procedures
124
SUPPORT ROD