Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Reinstall the light assembly and
tighten the two screws and nut.
Use a Phillips-head screwdriver to
remove the two screws holding
the license plate light lens.
Reinstall the two screws and
tighten them securely.
Turn on the lights to make sure
the new bulb is working.
Reinstall the two covers in the rear
light assembly.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Turn on the parking lights and
check that the new bulb is
working.
Put the cover in place in the cargo
area.
3.
2.
4.
5.
1.
8.
9.
11.
10.
12.
Lights
Maintenance
Replacing a Rear License Plate
Bulb
204