＊
＊
▲
The cassette system features Dolby
noise reduction, automatic sensing of
chromium-dioxide (CrO ) tape, and
autoreverse for continuous play.
To operate the cassette player, the
ignition switch must be in
ACCESSORY(I) or ON(II). Make
sure the tape opening on the cassette
is facing to the right, then insert the
cassette most of the way into the slot.
The system will pull it in the rest of
the way, and begin to play.
The tape direction indicator will light
to show you which side of the
cassette is playing. The
indicates
the side you inserted facing upward
is now playing. If you want to play
the other side, press the PLAY/
PROG button.
Dolby noise reduction turns on when
you insert a cassette. The
indi-
cator will light in the display. If the
tape was not recorded with Dolby
noise reduction, turn it off by
pressing the NR button.
Noise reduction remains off until you
turn it on by pressing the button
again.
If you turn the system off while a
tape is playing, either with the PWR/
VOL knob or by turning off the
ignition, the cassette will remain in
the drive. When you turn the system
back on, the tape will begin playing
where it left off.
When the system reaches the end of
the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
from the drive, press the EJECT
button on the cassette player.
To switch to the radio or optional CD
player/changer while listening to a
tape, press the AM/FM or CD/
TAPE button. To change back to the
cassette player, press the CD/TAPE
button.
2
Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing Corpo-
ration. ‘‘DOLBY’’ and the double-D symbol
are trademarks of Dolby Laboratories
Licensing Corporation.
Audio System
Comf ort and Convenience Features
Operating the Optional Cassette
Player
124
０２／０５／２９ １７：３５：１５ ３１Ｓ５Ａ６２０ ０１２７
Main Menu
Table of Contents
▲
▼
