Page
17
of
18
22. Connect the harness to the inflator brackets.
•
Insert the side without the shrink wrap tubing first. Insert the harness at the third “valley” in the corrugated tube.
•
Insert the side of the harness with the shrink wrap tubing into the inflator bracket. Make sure the harness is
securely inserted and that it does not sag.
23. Reinstall the passenger’s airbag into the vehicle and torque the new locknuts to
9.8 N•m (7.2 lb-ft)
. Refer to the
service repair information.
24. Reconnect the battery negative cable and enter the anti-theft code for the audio and navigation system
(if applicable), then enter the audio presets.
25. Turn the ignition to the ON (II) position and make sure the SRS indicator comes on for about 6 seconds, then turns
off.
