Honda 2002 RL, Руководство пользователя

Страница: 44 / 343

If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the belt, pull it out only as
far as needed.
See page for instructions on how
to wear the lap/shoulder belt
properly.
For added protection, the front seat
belts are equipped with automatic
seat belt tensioners. When activated,
the tensioners immediately tighten
the belts to help hold the driver and
a front passenger in place.
The tensioners are designed to
activate primarily in frontal collisions.
The tensioners are independent of
the airbag system, so they can be
activated during a collision that
might not cause the airbags to
deploy. In this case, the airbags
would not be needed but the
additional seat belt tension can be
helpful.
The tensioners will be activated in a
collision severe enough to cause the
front airbags to inflate.
The SRS indicator light will
come on if there is a
problem with your automatic seat
belt tensioners (see page
).
When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled in the normal
way.
45
15
Driver and Passenger Saf ety
Additional Information About Your Seat Belts
Automatic Seat Belt Tensioners
41
01/09/28 19:31:39 31SZ3660_044