Honda 2001 Accord Sedan Скачать руководство пользователя страница 31

Страница: 31 / 372

Protecting Children

Protecting Infants

Child Seat Type

Only a rear-facing child seat provides

proper support for a baby's head,

neck, and back. Infants up to about

one year of age must be restrained in

a rear-facing child seat.

Two types of seats may be used: a

seat designed exclusively for infants,

or a convertible seat used in the rear-

facing, reclining mode.

We recommend that an infant be

restrained in a rear-facing child seat

until the infant reaches the seat

maker's weight or height limit and is

able to sit up without support.

Rear-Facing Child Seat Placement

In this car, a rear-facing child seat

can be placed in any seating position

in the back seat, but not in the front

seat.

Never put a rear-facing child seat in

the front seat.

If the passenger's

front airbag inflates, it can hit the

back of the child seat with enough

force to kill or seriously injure an

infant. If an infant must be closely

watched, we recommend that

another adult sit in the back seat

with the baby.

Do not put a rear-facing child seat in

a forward-facing position.

If placed

facing forward, an infant could be

very seriously injured during a

frontal collision.

Driver and Passenger Safety

Placing a rear-facing child seat

in the front seat can result in

serious injury or death if the

passenger's front airbag inflates.

Always place a rear-facing child

seat in the back seat, not the

front.

０３／０７／１０１６：１１：０９３１Ｓ５Ａ９３０００２１

Main Menu

Table of Contents

Содержание 2001 Accord Sedan





















































































































































































































































































































































































Результаты поиска

Содержание 2001 Accord Sedan

Отзывы:

Бренды по названию

Популярные бренды

Honda 2001 Accord Sedan, Руководство пользователя

Результаты поиска

Содержание 2001 Accord Sedan

Отзывы:

Бренды по названию

Популярные бренды