Honda 2000 Accord Sedan Скачать руководство пользователя страница 142

Страница: 142 / 320

Audio System

Operating the CD Player

You operate the CD player with the

same controls used for the radio.

With the system on, insert the disc

into the CD slot. Push the disc in
halfway, the drive will pull it in the
rest of the way and begin to play.

The number of the track that is

playing is shown in the display.

You can also play 3-inch (8-cm) discs
without using an adapter ring. In all

cases, play only standard round discs.
Odd-shaped CDs may jam in the
drive or cause other problems.

When the system reaches the end of
the disc, it will return to the begin-

ning and play that disc again.

You can switch to the radio while a

CD is playing by pressing the AM or
FM button. Press the CD button to
return to playing the CD. The CD

will begin playing where it left off.

CONTINUED

Comfort and Convenience Features

FM BUTTON

CD SLOT

SKIP BUTTONS

AM BUTTON

REPEAT BUTTON

CD BUTTON

RDM BUTTON

Main Menu

Table of Contents

▲

▼

Содержание 2000 Accord Sedan

































































































































































































































































































































Результаты поиска

Содержание 2000 Accord Sedan

Отзывы:

Honda 2000 Accord Sedan, Онлайн руководство пользователя, Страница: 142 / 320

Результаты поиска

Содержание 2000 Accord Sedan

Отзывы: