Service Station Procedures
Opening the Hood
1. Shift to Park or Neutral and set
the parking brake. Pull the hood
release handle located under the
lower left corner of the dashboard.
The hood will pop up slightly.
2. Standing in front of the vehicle,
put your fingers under the front
edge of the hood to the right of
center. Slide your hand to the left
until you feel the hood latch
handle. Push this handle to the left
until it releases the hood. Lift the
hood.
3. Pull the support rod out of its clip
and insert the end into the hole on
the left side of the hood.
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop.
After closing the hood, make sure it
is securely latched.
Before Driving
HOOD RELEASE HANDLE
LATCH
CLIP
SUPPORT ROD
Main Menu
Table of Contents
▲
▼
Содержание 1998 Prelude
Страница 169: ...Required Maintenance Record for Normal and Severe Schedules Maintenance Main Menu Table of Contents...
Страница 245: ...Fuses INTERIOR FUSE BOX 1 On Type SH 2 On Canadian models Taking Care of the Unexpected Main Menu Table of Contents...
Страница 246: ...Fuses UNDER HOOD FUSE BOX Taking Care of the Unexpected Main Menu Table of Contents...