Lights
Replacing a Rear License Bulb
1. Remove the two screws and
remove the lens.
2. Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
3. Turn on the parking lights and
check that the new bulb is
working.
4. Reinstall the lens. Reinstall the
two screws and tighten them
securely.
Replacing Bulbs in the Interior
Lights
The courtesy lights in the doors,
tailgate and ceiling come apart the
same way. They do not all use the
same bulb.
1. Remove the lens by carefully
prying on the edge of the lens with
a fingernail file or a small flat-tip
screwdriver. Do not pry on the
edge of the housing around the
lens.
Door light:
pry on the bottom middle of the
lens.
Ceiling light:
Pry on the front edge of the lens
in the middle.
2. Remove the bulb by pulling it
straight out of its metal tabs.
3. Push the new bulb into the metal
tabs. Snap the lens back in place.
CONTINUED
Maintenance
Main Menu
Table of Contents
▲
▼