Child Safety
Second Seat Installation:
There are three attachment points
available for the seven-passenger
model, and two attachment points
available for the six-passenger model.
To install a child seat in the second
seat, fold the third seat into the floor
recess (see page
60
). You will find a
U-shaped slit in the carpeting at each
attachment point. Select the attach-
ment point you want to use, and pull
up the carpeting at the slit.
Third Seat Installation:
There are two attachment points on
the tailgate sill. Select the attach-
ment point you want use, and
remove the plug with a small flat-
tipped screwdriver or a fingernail file.
Install the tether hardware that came
with the child seat.
Tighten to:
22 N.m (2.2 kgf.m , 16 lbf.ft)
If you are not sure how to install the
bracket, have it installed by your
Honda dealer.
Canadian Cars
The anchor plate and mounting
hardware for a top tether are
supplied with the car. When install-
ing, make sure the toothed washer is
on the bottom of the bolt.
TOOTHED WASHER
The supplied anchor plate is
designed only for mounting a child
restraint. Do not use it for any other
purpose.
Storing a Child Seat
When you are not using an infant
seat or other child restraint, either
remove it or make sure it is properly
secured so it cannot be thrown
around the car during a crash.
Driver and Passenger Safety
Main Menu
▲
▼
Table of Contents