Audio System
You cannot manually store radio
station frequencies in the Preset
buttons when AUTO SELECT is
ON. If you do not like the stations
found by AUTO SELECT, you can
still use the TUNE or SEEK
function to find other stations.
Adjusting the Sound
Use the Balance and Fader
controls to adjust the sound
"direction." The Balance control
moves sound left to right. The
Fader control moves it front to
back.
To use either control, push on the
knob to get it to pop out. Adjust
the front-to-back sound to your
liking with the outside ring.
Adjust the side-to-side sound
balance with the knob. Push the
knob back in when you are done.
The illumination for the radio
controls comes on with the
instrument panel lights, even if the
radio is off. You can use the Balance
control to turn off the radio panel
illumination even with the radio on.
Push the control knob so it pops
out, then pull it out slightly further.
Check this control if the control
panel lights do not come on with
the instrument panel lights.
Use the Bass and Treble controls
to adjust the tone quality to your
liking. Push on the knob to get the
controls to pop out. Adjust the
bass level with the outer ring and
the treble level with the knob.
When finished, push the knobs
back in so there is less chance of
accidentally changing your
settings.
Comfort and Convenience Features
SEEK/TUNE
BAR
AM/FM
BUTTON
FADER/BALANCE
CONTROL
BASS/TREBLE
CONTROL
Main Menu
Table of Contents
▲
▼