Honda 1991 Accord Wagon, Руководство пользователя

Страница: 101 / 148

Brake Wear Indicators
Your car is equipped with audible brake wear indicators. When the
brake pads need to be replaced, the wear indicators will make a
high-pitched chirp.
NOTE: Due to some driving habits or climates, brakes may "squeal"
when you first apply them or have them partially applied; this is
normal, and does not indicate excessive wear. The wear indicator
makes a "screeching" sound while the brakes are applied.
Brake Fluid
Check the fluid level in the brake
reservoir periodically; it should be
between the MAX and MIN marks
on the reservoir.
If the level is near the MIN mark,
add fluid to raise it to the MAX
mark. Do not overfill. Use only
brake fluid manufactured to DOT
3 or DOT 4 specifications (see
reservoir cap) from a sealed
container. Follow the manu-
facturer's instructions printed on
the can.
CAUTION: The arrow on the reservoir cap must be pointing
forward after the cap is installed. Make sure the brake warning
switch wiring doesn't get caught between the cap and top edge of
the reservoir.
NOTE: A low brake fluid level may be an indication of brake wear or
of brake fluid leakage. You should have your brakes checked if the
brake fluid level in the reservoir is low before refilling it.
MAX
MIN