Honda 160, Руководство пользователя

Страница: 7 / 45

ENGLISH
Oil Change
OIL FILLER CAP/DIPSTICK
DRAIN PLUG
WASHER
UPPER LIMIT
7
Drain the used oil when the engine is warm. Warm oil drains
quickly and completely.
Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick, oil drain plug and washer.
Allow the used oil to drain completely, then reinstall the oil
drain plug and a new washer, and tighten the oil drain plug
securely.
With the engine in a level position, fill with the recommended oil
(see page
) to the upper limit mark (bottom edge of the oil fill
hole) on the dipstick.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take used oil in a sealed
container to your local recycling center or service station for
reclamation. Do not throw it in the trash, pour it on the ground,
or pour it down a drain.
Running the engine with a low oil level can cause engine
damage. This type of damage is not covered by the Distributor’s
Limited Warranty.
Install the oil filler cap/dipstick and tighten securely.
3.
4.
1.
2.
6
09/07/06 19:00:24 32Z4F810_007