5 of 7
BOLT
SCREW
CLIP
18. Remove the cap as shown.
<Left side>
CAP
LEFT HEADLIGHT
COVER
17. Remove the front fender as shown.
• Cover the duct with a shop towel or similar to
prevent debris from entering the duct.
FRONT FENDER
DUCT
FRONT FENDER
(Under side)
19. Remove the clip and connector as shown.
20. Repeat Steps 18 and 19 on the right side.
21. Remove the headlight harness as shown.
SCREW
LEFT HEADLIGHT
COVER
FRONT FENDER
CLIP
3-PIN WATER PROOF
CONNECTOR (Green)
FRONT FENDER
FRONT FENDER
HEADLIGHT
HARNESS
(Save)
22. Remove the left headlight cover as shown.
HEADLIGHT
HARNESS
