2 of 10
AII 46516 (1108)
© 2011 American Honda Motor Co., Inc. – All Rights Reserved.
INSTALLATION
1.
Make sure you have the anti-theft code for the audio
and navigation system (if equipped).
2.
Disconnect the negative cable from the battery.
Removing Parts (Vehicle Exterior)
3.
Remove the front bulkhead cover (seven clips).
Customer Information:
The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
021502AX
FRONT BUMPER
FRONT
BULKHEAD
COVER
7 CLIPS
4.
Attach tape to the front bumper as shown.
5.
Remove two self-tapping screws and ten clips.
6.
Remove the front bumper (fourteen retaining tabs).
NOTE: Have an assistant help you when removing
the front bumper. Place the front bumper on a
blanket after removal.
021503AX
10 CLIPS
FRONT BUMPER
2 SELF-TAPPING
SCREWS
3 RETAINING
TABS
TAPE
8 RETAINING
TABS
FLAT-TIP
SCREWDRIVER
3 RETAINING
TABS
TAPE
www.collegehillshonda.com
