6 of 14
AII01797-23 (1504)
© 2015 American Honda Motor Co., Inc. – All Rights Reserved.
•
To prevent clips from falling into the body panel
area, carefully insert a shop towel between the
driver’s A-pillar and the driver’s A-pillar trim.
•
Slide the driver’s A-pillar trim upward, and
remove the driver’s A-pillar trim.
•
Remove the shop towel and any clips.
QD40303BJ
DRIVER’S
A-PILLAR
DRIVER’S
A-PILLAR TRIM
SHOP TOWEL
QD40304BJ
DRIVER’S
A-PILLAR
TRIM
DRIVER’S A-PILLAR
TRIM
UPPER
CLIP
9.
Remove the remaining upper clip from the driver’s A-
pillar.
10. Install the new clip (supplied) to the driver’s A-pillar
trim.
Go to step 12.
QD40305BJ
Push
two tabs.
UPPER CLIP
(Discard.)
DRIVER’S
A-PILLAR
QC72508AJ
DRIVER’S
A-PILLAR TRIM
CLIP
(supplied)
