4
© Honda Access Europe NV. 2006
REAR DOOR
Installing the Clip
1. Open the left rear door.
2. Check the positions where the clip are installed
and clean the surfaces with the cleaner provided
from the kit.
5. Remove the adhesive backing from each clip.
6. Align the edge of the clip with the mark on the
door sash, and attach the clip on the sash.
• Hold the adhesive tape of the clip back side
firmly against the door sash for 15 seconds
after attaching the clip.
3. Measure each clip installation position to the
dimensions shown.
4. Mark with a felt-tip pen the position of the
measured dimension of the door sash.
7. Repeat the procedure to install the clip on the
right side.
6927030S
20 mm
Make marks as
marks with felt-tip
pen as shown.
Make marks as
marks with felt-tip
pen as shown.
Make marks as
marks with felt-tip
pen as shown.
110 mm
20 mm
30 mm
LEFT REAR
DOOR SASH
Make marks as marks with
felt-tip pen as shown.
6927040S
CLIP
Align with
the end of
the radius.
DOOR
SASH
CLIP
Align the edge of the
clip with the mark
made in the step 4.
Align the edge of
the clip with the
mark made in the
step 4.
CLIP
Align the edge
of the clip with
the mark made
in the step 4.
Align with the end
of the radius.
DOOR
GLASS
DOOR
GLASS
DOOR
GLASS
Align the edge of the
clip with the mark
made in the step 4.
DOOR
GLASS
Align with
the end of
the radius.
CLIP
ADHESIVE
BACKING
• Remove.
Align with
the end of
the radius.
6927020S
CLIP INSTALLATION POSITIONS (4)
• Clean the surface with a cleaner.
LEFT REAR
DOOR
