© 2009 American Honda Motor Co., Inc. – All Rights Reserved.
AII 42259 (0908)
5 of 7
14. Reinstall the left and right trunk side trim panel (five
clips for each panel).
15. Thread one small anchor with spacer into the upper
rivet nut, and install one small anchor without spacer
into the lower rivet nut. If the anchors are positioned
vertically, turn them to the horizontal position.
16. Thread one large anchor onto the 6 x 16 mm hex
bolt. Position the anchor horizontally.
17. Repeat the steps 15 and 16 to install anchors on the
right trunk side trim panel.
722009CE
LEFT TRUNK
SIDE TRIM PANEL
SMALL ANCHOR
(without spacer)
LARGE
ANCHOR
HEX BOLT,
6 x 16 mm
RIVET
NUT
RIVET
NUT
SMALL
ANCHOR
(with spacer)
Position the anchors
horizontally.
TRUNK
LID
HINGE
18. Attach template A to the back of the trunk rear trim
panel using masking tape.
19. Using a pushpin, mark the back of the trunk rear trim
panel according to template A. Remove the
template.
20. Turn the template over and attach it to the left side of
the trunk rear trim panel using masking tape.
21. Mark the rear trim panel the same way. Remove the
template.
7220100E
PUSHPIN
REAR TRIM PANEL
TEMPLATE
TEMPLATE
Align with the rib.
REAR TRIM PANEL
MASKING
TAPE
MASKING TAPE
MASKING
TAPE
7220110E
PUSHPIN
TEMPLATE
TEMPLATE
TRUNK REAR TRIM
PANEL
TRUNK REAR TRIM PANEL
Align with the rib.
MASKING
TAPE
MASKING
TAPE
MASKING
TAPE
MASKING
TAPE
