© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
AII13220-10 (1911)
7 of 8
15. Install the trailer hitch cover to the rear bumper with
the eight retaining tabs and four bolts removed in
step 8. Then, plug the vehicle connector to the
hands-free access unit connector (if equipped).
TRAILER
HITCH COVER
VEHICLE
CONNECTOR
(If equipped)
HANDS-FREE
ACCESS UNIT
CONNECTOR
(If equipped)
8 RETAINING
TABS
REAR
BUMPER
4 BOLTS
16. With the help of an assistant, install the rear bumper.
17. With the help of an assistant, loosely secure the
trailer hitch to the vehicle with the six flange bolts.
TRAILER
HITCH
6 FLANGE BOLTS
(Loosely tighten
by hand.)
18. Tighten the six flange bolts to an initial torque of
32 lb-ft (43 N·m) in the order shown. Then, tighten
the bolts to a final torque of 63 lb-ft (85 N·m) in the
same order.
NOTE: After tightening all the bolts, torque the bolts
again in the same order.
BOTTOM VIEW
6 FLANGE BOLTS
63 lb
-
ft (85 N
·
m)
TRAILER
HITCH
1
3
5
2
4
6
TRAILER
HITCH
19. Check that all wire harnesses are routed properly
and all connectors are plugged in.
20. Install all removed parts except for the front
bulkhead cover and the intake air tube.
21. Connect the negative cable to the battery.
22. Install the front bulkhead cover and the intake air
tube.
23. Press and hold the audio unit power button for 2
seconds to restore the audio and navi (if equipped)
system functions.
24. Set the clock on vehicles without navigation.
25. If necessary, restore the systems back to normal
operation as described in the service information.