6 of 8
AII13220-10 (1911)
© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
12. Install the two sensor bars to the accessory hands-
free access unit. Make sure the sensor bars are
positioned properly.
Make sure that the
sensor bar is installed.
2 SENSOR
BARS
ACCESSORY
HANDS-FREE
ACCESS UNIT
Make sure that the
sensor bar is installed.
13. Install the accessory hands-free access unit to the
trailer hitch cover. If the vehicle is equipped with the
standard hands-free access power tailgate, use the
two self-tapping screws and one clip removed in step
9; if not, use the two new self-tapping screws and clip
in the kit.
ACCESSORY
HANDS-FREE
ACCESS
UNIT
TRAILER
HITCH COVER
CLIP
2 SELF-TAPPING
SCREWS
14. Install the four spring nuts removed in step 9 to the
trailer hitch cover.
NOTE: Make sure to install the spring nuts as shown.
TRAILER
HITCH COVER
4 SPRING NUTS