2 of 3
3. Refer to the Service Manual for the motorcycle.
Remove the drive chain case.
Item
N·m
kgf·m
lbf·ft
6 mm socket bolt
10
1.0
7
6 mm flange nut
12
1.2
9
8 mm socket bolt
24
2.4
18
TORQUE CHART
Tighten all screws, bolts, and nuts to their specified
torque values. Refer to the Service Manual for the torque
values of the removed parts.
INSTALLATION
CAUTION
• To prevent burns, allow the engine, exhaust system,
radiator, etc., to cool before installing the accessory.
NOTE:
• Take care not to damage the painted surfaces of the
motorcycle.
• Illustration shows NC700X type, other types are
similar.
1. Install the left saddlebag hook and hook cover as
shown.
• Repeat on the right side.
2. Refer to the Installation Instruction of the rear carrier,
install the rear carrier.
REAR CARRIER
LEFT
HOOK COVER
LEFT
SADDLEBAG
HOOK
COLLAR B
COLLAR A
6 mm WASHER
6 mm
FLANGE
NUT
BOLT
DRIVE CHAIN CASE
4. Work on the rear fender B as shown.
• Be careful not to damage the harness.
• Remove any burrs from the edge of the hole.
• Repeat on the right side.
FILE
File off the
cutout surface.
SIDE CUTTERS
Remove.
SLIT
REAR FENDER B
