2 of 8
AII 40181 (0808)
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
TOOLS AND SUPPLIES REQUIRED
Phillips screwdriver
Flat-tip screwdriver
10 mm wrench
10 mm Socket
Ratchet
Diagonal cutters
Shop towel
Isopropyl alcohol
Plastic Trim Tool (T/N SILTRIMTL10)
Illustration of the Bass Speaker System Installed on
the Vehicle
INSTALLATION
1.
Make sure you have the anti-theft codes for the
audio unit, then write down the audio presets.
2.
Disconnect the negative cable from the battery.
Customer Information:
The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
871504AH
BASS
SPEAKERS
BASS UNIT
3.
Open the trunk lid. Pull the release handle on the
bottom of the rear shelf to tilt the rear seat to the
front.
4.
Remove the trunk spring protector (four clips).
871505AH
RELEASE
HANDLE
FRONT
REAR
SEAT
871506AH
REAR SHELF
TRUNK SPRING
PROTECTOR
4 CLIPS
FRONT
www.collegehillshonda.com
