1998 American Honda Motor Co., Inc. – All Rights Reserved
2 of 5
AII 20248 (9812)
5. Remove the driver’s dashboard lower cover
(two self-tapping screws, four retaining clips
and one connector).
DRIVER’S DASHBOARD
LOWER COVER
GLASS HATCH
OPENER CONNECTOR
RETAINING
CLIPS
Pull
CORRECT
INCORRECT
SELF-
TAPPING
SCREWS
6. Remove the lower console cover.
AT Model:
•
Remove the two self-tapping screws
attaching the right side of the center console.
SELF-TAPPING
SCREWS
(SHORT)
CENTER
CONSOLE
SELF-
TAPPING
SCREWS
(SHORT)
CLIP
LOWER CONSOLE
COVER
RETAINING
CLIPS
CLIP
SELF-
TAPPING
SCREWS
(LONG)
•
Remove the two clips attaching the lower
console cover, then remove the cover by
pulling it toward you.
•
Remove the two self-tapping screws from
the bottom of the center console, open the
console pocket, and remove the four
self-tapping screws behind the pocket.
MT Model:
•
Remove the change lever knob by sliding the
boot down while pressing down on the two
retaining tabs at the bottom of the knob, then
by turning it counterclockwise.
SELF-TAPPING SCREW
CLIP
LOWER
CONSOLE COVER
RETAINING
TABS
CHANGE
LEVER
KNOB
•
Remove the four self-tapping screws and
two clips fastening the lower center console
cover and remove the console cover.
•
Remove the four self-tapping screws
securing the console pocket and remove the
pocket.
SELF-TAPPING
SCREW
CLIP
CONSOLE
POCKET
LOWER CENTER
CONSOLE LINING
CLIP
•
Remove the two clips that fasten the lower
center console lining and remove the lining
by lifting it upward.
