Honda Power Products UMK435T, Руководство пользователя

Страница: 23 / 67

20
PRE-OPERATION CHECKS
5.
Perform a pre-operation inspection on a firm, level surface with the
engine stopped and make sure that the engine switch is in the OFF
position.
Running the engine with low oil level will cause serious engine
damage.
Check the engine oil level
ENGINE OIL CAPACITY:
1.
OIL FILLER NECK
UPPER OIL LIMIT
ENGINE OIL
FILLER CAP UPPER OIL LIMIT
For safe and efficient trimming, always make a pre-operation
inspection before operating:
Every 10 hours, check the engine oil level and replenish oil up to the
top of the oil filler neck if the engine is operated for more than 10
hours continuously.
Install the oil filler cap.
If the oil level is low, fill to the edge of the oil filler neck with the
recommended oil.
If the oil is contaminated or deteriorated, replace it (see page
).
Check the oil level: it should reach to the edge of the oil filler neck,
and check the engine oil for contamination and deterioration.
Place the grass/weed trimmer on a level surface and remove the oil
filler cap.
0.10 L
1.
2.
3.
4.
44
10/01/19 17:52:20 3CVK9600_022