HONDA marine BF115J, Руководство пользователя

Страница: 71 / 170

70
7. STARTING THE ENGINE
• Make sure the battery switch is
ON before turning ON the
ignition switch or power switch.
If the battery switch is OFF while
attempting to start the engine,
the buzzer will sound three times.
Hold the priming bulb so that the
outlet end is higher than the inlet (so
that the arrow on the priming bulb
points up), and squeeze it until it feels
firm, indicating that fuel has reached
the outboard motor. Check for leaks.
Do not touch the priming bulb with
the engine running or when tilting
up the outboard motor. The vapor
separator could overflow.
Starting the Engine
(D1, D2 types)
To prevent damage to the outboard
from overheating, never run the
engine with the propeller out of
water.
Fuel Priming
ARROW
PRIMING BULB
OUTLET END
(outboard motor side)
INLET END
(tank side)
WARNING
Be careful not to spill any fuel.
Spilled fuel vapor may ignite. If
any fuel is spilled, make sure the
area is dry before starting the
engine.
WARNING
Exhaust contains poisonous
carbon monoxide which can
cause unconsciousness and may
lead to death. Never run the
outboard motor in a boat house or
other confined area.
EMERGENCY STOP
SWITCH CLIP
STOP
EMERGENCY STOP SWITCH
EMERGENCY STOP
SWITCH LANYARD
32ZVT600.book 70 ページ ２０２１年１０月１５日 金曜日 午後４時９分