HONDA marine BF115J, Руководство пользователя

Страница: 70 / 170

69
PRE-OPERATION CHECKS
Check the following items:
(1) The fuel hose for kinking,
collapsing or a loose connection.
(2) The remote control lever for
smooth operation.
(3) The switches for correct
operation.
(4) The stern bracket for damage.
(5) The tool kit for missing spare
parts and tools (page 120).
(6) The anode metal for damage,
looseness or excessive corrosion.
The anode (sacrificed metal) helps to
protect the outboard motor from
corrosion damage; it must be exposed
directly to the water whenever the
outboard motor is in use. Replace the
anodes when they have been reduced
to about two-thirds of their original
size, or if they are crumbling.
The possibility of corrosion
damage is increased if the anode is
painted over or allowed to
deteriorate.
Parts/materials which should be
installed on board:
• Owner’s Manual
• Tool kit
• Spare parts: spark plugs, engine oil,
spare propeller, castle nut, washer
and cotter pin.
• Spare emergency stop switch clip.
• Other parts/materials required by
laws/regulations.
(2)
(1)
(3)
(4)
(5) TOOL KIT (page 120)
Other Checks
(6)
32ZVT600.book 69 ページ ２０２１年１０月１５日 金曜日 午後４時９分