Honda Electronics HE-6801, Руководство по эксплуатации

Страница: 51 / 108

45
TO SHOW ISOBATH
To show isobath
Select [6.READOUT SETTING] → [1.MAP
READOUT] → [3.DEPTH LINE] on the menu.
Select and set each item [either DEPTH LINE 1
〜
3]
[DISPLAY RANGE] from [3.DEPTH LINE].
※
Isobath may be not indicated depending on kind
of map card or area.
[Isobath]
Isobath is line same deep bottoms are connected.
You can show or erase the isobath and select the color of isobath on the menu. (
→
page 54)
[Condition of showing isobath]
Isobath are shown when number of range displayed now (scale on the lower left of
screen) is less (enlarged) than depth which is set on [5.DISPLAY RANGE] within [3.
DEPTH LINE].
1
2
※
Please refer to [HOW TO OPERATE MENU] (
→
page12 ) for operation of menu.
TO INDICATE PLACE NAME
・
OTHER NAME
・
FISH
SHOAL
・
LIGHT HOUSE AND ETC.
To indicate place name, other name, fish shoal, light house and etc.
Select [6.READOUT SETTING]
→
[1.MAP
READOUT]
→
[4. POINT NAME] on the menu.
SET each item of [4.POINT NAME].
After you finish menu, adjust range with [EXP] key,
[RED] key or [
] key and then indicate place
name, other name, fish shoal, lighthouse and etc.
QUICK RANGE key
RED key EXP key
[Display condition: Place name and other name]
Place name or other name is indicated when map range is enlarged more than 50NM.
However, some place name or other name is not indicated depending on range.
[Display condition: Fish shoal, lighthouse and etc.]
Fish shoal, lighthouse and etc. are shown when number of range displayed now (scale
on the lower left of screen) is less (enlarged) than depth which is set on [2.
LIGHTHOUSE/BUOY] [3. FISH HAVEN] within [4. POINT NAME].(
→ page 54)
1
2
3