USER MANUAL
USER MANUAL
23
24
Troubleshooting
SPECIFICATIONS
Trouble
Please check
Solutions
Cleaning nozzle does not extend
The nozzle does not spray water
Cleaning water pressure is weak
The cleaning water is cold
The seat is cold
The water supply hose bent and
water blocked
The cleaning nozzle blocked
The water filter clogged with foreign
matter
The water temperature set to room
temperature state
The seat temperature set to room
temperature state
Stretch the inlet water supply hose.
Clean the nozzle
Clean the filter
Reset warm water temperature
Reset the seat temperature
Malfunctions occur, please contact the company's service center or distributor.
●Please do not disassemble, repair and modify this product by
yourself
●Doing so may result in fire, electrical shock or short circuit
.
WARNING
COMPULSORY
SPECIFICATIONS
TROUBLESHOOTING
Rated voltage
AC120V 60Hz
Instant
Length
≥
3.6ft(1.1m) (grounded)
10.87~108.7psi(0.075MPa-0.75MPa (Static water pressure))
1000W ( inlet water temperature
59℉
(15
℃
), inlet water pressure
29psi(0.2 MPa), water out spray
，
rear wash and seat temperature
set in highest level.)
Rated power
Type of water heater
Power cord
Inlet water pressure
Inlet water temperature
Operating temperature
Outlet temperature
Heater capacity
Safety device
Surface temperature
Heater capacity
Safety device
Damping device
Rear wash
Front wash
The final interpretation of this product belongs to
HigherFurther
. The product is subject to change without
notice.
Cleaning
Heated seat
Spray
volume
about 0.1~0.16gal/min(400~600ml/min)
Temperature adjustment range: 91.4~102.2
℉
(33~39
℃
)
1300W
Flow water temperature ther
Temperature fuse
4 levels (room temp.~about
104℉
(40
℃
))
Temperature ther fuse
with seat and cover
41-95
℉
(5-35
℃
)
41-105.8
℉
(5-41
℃
)
45W
USER MANUAL
WARNING
This product can expose you to chemicals including lead(Pb)
,
which is known to the
State of California to cause cancer. For more information go to:
www.P65Warnings.ca.gov
