freeze in the wintertime.
4.
The electrical connection should be placed in a water-proof area and should be at
least 2 meters (6 feet) away from the edge of the pond.
5.
Please keep the water clean to prolong the life of the pump.
6.
Keep the electrical connections dry! Ensure that the electrical cord loops below the
electrical outlet to form a
“
Drip Loop
”
. This will prevent water from running down
the cord into the electrical outlet.
7.
The pump has a built-in thermal overload device which prevents the pump from
overheating. The pump must be allowed to cool down before restarting.
Maintenance
：
1. Clean the pump regularly to ensure performance.
2. When cleaning the blockage in the pump body, please disconnect the power supply
first, and then disassemble it correctly according to the steps.
3. Use soft cloth to clean the impeller and clean the pump with clear water.
4. Remove the pump inlet to access the impeller. Turn around the rotor to check if it is
broken or jammed.
5. Check the pump inlet, outlet, and connecting pipe if it is blocked.
Troubleshooting:
Problems
Reasons
Solutions
The water pump
doesn't work
1.The power is not on;
2.Rotor stuck;
3.Pump overheating.
1.
Turn on electricity;
2
. Clean the rotor;
3.
Wait for the water pump to cool down
completely.
The flow rate is
weakened or other
abnormal
phenomena
appears
1.impeller damaged;
2.The bottom basket filter part
of the pump is out of the
water.
1.Replace the impeller with a new one;
2.Put the pump bottom basket filter
submersible under he water completely.
Water pump idles
1.The outlet pipe is too long or
blocked;
2.There is residual air in the
impeller chamber.
1.Cut the outlet pipe shorter or remove
blockage;
2. Keep the water pump in water, and
continue to turn on and off the power supply
for 2 to 3 times to remove the residual air in
the impeller chamber.
