Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
Figure 2
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A) and Side Panels (B),
, then tighten.
(C)
(See Figure 1)
STEP 2
Attach Back Rail ( ) to Side Panel (B)
F
with Cam Lock. (See Figure 2)
Attach Back Upright (E) to Back Rail ( ).
F
Slide Back Panels (D) into position.
Attach Back Rail ( ) to unit with Cam Lock.
G
Cam Lock Screw
Cam Lock
D
B
G
F
D
E
C
A
B
