Assembly Instructions 7/7
Hardware List
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraints must be installed following these instructions exactly.
Anchor
2 pcs. (+1 extra)
Bracket
4 pcs. (+1 extra)
Tipover Restraint
2 pcs. (+1 extra)
M3.5x40
Wall Screw
2 pcs. (+1 extra)
M3.5x16
Wood Screw
2 pcs. (+1 extra)
STEP 11
Place unit at desired location.
Drill a 3/8” holes in wall in-line with
pre-drilled holes at top of unit.
Move unit.
Insert Anchors into the wall hole
and attach Brackets with Wall Screws.
Attach Brackets at pre-drilled holes
at top of unit with Wood Screws.
Move unit back into place.
Slide Tipover Restraints through
Brackets on wall and Brackets on unit.
(See Figure 10)
Put tie end of Tipover Restraints into lock
end of Tipover Restraints and pull until tight.
Bracket
on wall
Anchor in wall
3/8” wall hole
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
Figure 10
Wood Screw
Wall Screw
Pre-drilled hole
at top of unit
Drill 3/8” hole in wall
Top of unit
