Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Stretcher (D) to Stretcher (C)
with Head Cap Bolt (short), tightening
bolt only halfway. (See Figure 1)
C
D
Figure 1
Figure 2
STEP 2
Place Top (A) upside down on a soft cloth.
Attach Legs (B) to Top (A) with Flat Washers,
Spring Washers and Head Cap Bolts (long),
tightening bolts only halfway. (See Figure 2)
Attach unit from Step 1 to unit with
Head Cap Bolts (short), tightening bolts only halfway.
A
B
B
B
Flat Washer
Spring Washer
Head Cap Bolt (long)
Head Cap Bolt (short)
Head Cap Bolt (short)
