Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Key Wrench in a safe place as the bolts may need to be tightened up in the future.
Figure 1
STEP 1
Attach Front Stretcher (D) and Back Stretcher (E)
to Frame (B) with Flat Washers, Spring Washers
and Bolts (short), tightening the bolts only half way.
(See Figure 1)
D
E
Bolt (short)
Flat Washer
Spring Washer
A
B
Bolt (long)
Flat Washer
Spring Washer
STEP 2
Attach Seat (A) to unit with Flat Washers,
Spring Washers and Bolts (long),
tightening the bolts only half way.