Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
D
D
A
B
Spring Washer (small)
Head Cap Bolt
Flat Washer (small)
Figure 1
STEP 2
Attach Top (A) to Top (B) by aligning dowels with the holes and firmly
pushing together.
Engage the locks by turning their handles clockwise 1/4 turn. (See Figure 2)
Attach Table Slides (D) to unit with Flat Washers (small), Spring Washers
(small) and Head Cap Bolts.
Tighten Wood Screws. (See Figure 3)
D
D
A
B
STEP 1
Place Tops (A) and (B) upside down
on a soft cloth.
Remove Table Slides (D) from their packing position by loosening
and removing Flat Washers (small), Spring Washers (small) and
Head Cap Bolts. (See Figure 1)
Note: These 4 Flat Washers (small), Spring Washers (small) and
Head Cap Bolts will be used in Step 2. Do not discard.
Figure 2
Spring Washer (small)
Head Cap Bolt
Flat Washer (small)
Wood Screw
Figure 3
