Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
C2
C3
C4
C5
C5
Head Cap Bolt
Left Unit Right Unit
Head Cap Bolt
Figure 1
C1
B
Wood Screw
Machine Screw
Drawer Pull Handle
Figure 2
A
STEP 1
Attach Rails (C5) and Back Part (C4) to
Side Part (C2) with Head Cap Bolts.
(See Figure 1)
Attach Side Part (C3) to unit with
Head Cap Bolts.
STEP 2
Attach Left Unit and Right Unit to Keyboard Box with Head Cap Bolts.
STEP 3
Attach Front Part (B) to Base (C1) with Wood Screws.
Attach Drawer Pull Handle to unit with Machine Screws.
STEP 4
Attach Top (A) to unit with Head Cap Bolts.
Slide keyboard into place.
Level unit by adjusting the
adjustable levelers on the
bottom of legs.
(See Figure 2)
Head Cap Bolt
Keyboard Box
