Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Figure 1
D
E
E
E
E
Spring Washer
Flat Washer
Head Cap Bolt
STEP 1
Attach Stretchers (E) to Side Frame (D)
with Flat Washers, Spring Washers and
Head Cap Bolts, tightening the bolts
only half way. (See Figure 1)
D
STEP 2
Attach Side Frame (D) to unit with
Flat Washers, Spring Washers and
Head Cap Bolts, tightening the
bolts only half way. (See Figure 1)
Spring Washer
Flat Washer
Head Cap Bolt
