Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Wrench as the bolts and nuts may need to be tightened in the future.
Figure 1
A
B
Flat Washer (large)
Spring Washer (large)
Head Cap Bolt (long)
STEP 1
Attach Seat (B) to Back (A) with
Flat Washers (large), Spring Washers (large)
and Head Cap Bolts (long),
tightening bolts only halfway.
(See Figure 1)
STEP 2
Attach Connector (F) to unit with Bolts,
Flat Washers (large), Spring Washers (large)
and Nuts, tightening bolts and nuts only halfway.
(See Figure 2)
Tighten all Bolts and Nuts used in this step.
Cover all Bolts with Caps.
F
Figure 2
Cap
Bolt
Flat Washer (large)
Cap
Connector (F)
Flat Washer (Large)
Spring Washer (large)
Nut
