Assembly Instructions 3/3
Figure 4
STEP 3
Turn table over to its upright position.
Cover umbrella hole with Cover.
Level table by adjusting the adjustable
levelers on bottom of legs.
(See Figure 4)
Cover
Cap
Nut
Spring Washer
Flat Washer
Bolt
A
STEP 2
Place Top (A) upside down on a soft cloth.
Insert Bolts into pre-drilled holes in Top (A),
then tighten. (See Figure 3)
Attach unit to Top (A) with Flat Washers,
Spring Washers and Nuts,
tightening Nuts only halfway.
Tighten all Nuts used in Steps 1 and 2.
Cover all Nuts with Caps.
Figure 3
