Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into pre-drilled
holes of Side Frames (B), (C) and
Middle Panels (D), (E), then tighten.
(See Figure 1)
Cam Lock Screw
STEP 2
Attach Middle Panels (D) and (E) to Front Rail (I) with Cam Locks.
(See Figure 2)
Attach unit to Back Panel (F) with Flat Washers, Spring Washers and
Head Cap Bolts. (See Figure 3)
Figure 2
Figure 3
F
Cam Lock
Head Cap Bolt
Spring Washer
Flat Washer
Figure 1
C
B
D
E
E
D
I
