Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
STEP 1
Attach Stretchers (D) to Leg (B) with Flat Washers, Spring Washers
and Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
Attach Leg (C) to unit with Flat Washers, Spring Washer
and Head Cap Bolts, tightening bolts only halfway.
Flat Washer
Spring Washer
Head Cap Bolt
B
C
D
D
