Assembly Instructions 2/9
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 2
Attach lower Front Rail (J) to unit.
Attach middle Front Rail (J) to unit.
Attach upper Front Rail (J) to unit.
Slide Back Panels (F) into position.
STEP 1
Attach Side Panel (B) to Base (K) with
Head Cap Bolts. (See Figure 1)
Attach Back Upright (G) to Middle Panel (D),
then attach to unit.
Attach Back Upright (G) to Middle Panel (E),
then attach to unit.
Note: Assemble so Arrow labels
on Back Uprights (G) point
to each other.
Head Cap Bolt
Arrow labels point to each other
Figure 1
D
E
K
G
F
G
B
F
J
J
J
F
