Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
Figure 3
Figure 2
STEP 1
Place Top (A) upside down on a soft cloth.
Attach Apron (B) to Top (A) with
Flat Washers, Spring Washers and
Head Cap Bolts, tightening bolts
only halfway. (See Figure 1)
Tighten all bolts used in this step.
Head Cap Bolt
Spring Washer
Flat Washer
A
STEP 2
Attach Supports (E) to unit with
Flat Washers, Spring Washers
and Head Cap Bolts,
tightening bolts only halfway.
(See Figure 2)
Attach Shelf (C) to unit with
Head Cap Bolts (long),
tightening bolts only halfway.
(See Figure 3)
Head Cap Bolt (long)
Spring Washer
Flat Washer
Head Cap Bolt
E
E
E
E
B
C