Assembly Instructions 2/5
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Back Rail (D) to
Side Panel (B) with
Head Cap Bolt.
(See Figure 1)
Attach Back Upright (H)
to Back Rail (D).
Slide Back Panels (I) into position.
Attach Back Rail (D) to unit
with Head Cap Bolt.
B
D
D
I
I
Head Cap Bolt
STEP 2
Attach Base (J) to unit
with Cross Dowels and
Head Cap Bolts (long).
(See Figure 2)
Attach Front Rails (E) and (G)
to unit with Head Cap Bolts.
Attach Front Rail (F) to unit.
Figure 2
Figure 1
E
G
J
Head Cap Bolt
Cross Dowel
Head Cap Bolt (long)
H
F
