Assembly Instructions 9/9
Hardware List
IMPORTANT
To help reduce the risk of the unit tipping over, the Tip-over Restraints must be installed following these instructions exactly.
Anchor
2 pcs. (+1 extra)
Bracket
4 pcs. (+1 extra)
Tip-over Restraint
2 pcs. (+1 extra)
M3.5x38
Wall Screw
2 pcs. (+1 extra)
M3x16
Wood Screw
2 pcs. (+1 extra)
STEP 18
Place unit at desired location.
Drill 3/8” holes in wall in-line with
pre-drilled holes at top of unit.
Move unit.
Insert Anchors into the wall hole
and attach Brackets with Wall Screws.
Attach Brackets at pre-drilled holes
at top of unit with Wood Screws.
Move unit back into place.
Slide Tip-over Restraints through
Brackets on wall and Brackets on unit.
(See Figure 15)
Put tie end of Tip-over Restraints into lock
end of Tip-over Restraints and pull until tight.
Bracket
on wall
Anchor in wall
3/8” wall hole
Tie end
Lock end
Bracket at
top of unit
Tip-over
Restraint
Figure 15
Wood Screw
Wall Screw
Pre-drilled hole
at top of unit
Drill 3/8” hole in wall
Top of unit
