Assembly Instructions 2/10
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Make sure unit is level before tightening these screws.
The unit must be level to work properly. Use the included adjustable levelers to level.
Figure 1
STEP 1
Place Top (A), Side Panels (B), (E),
Middle Panels (C), (D)
and Plinths (I) on a soft cloth.
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Side Panels (B), (E),
Middle Panels (C), (D)
and Plinths (I), then tighten.
(See Figure 1)
I
H
I
H
Cam Lock
I
H
I
H
Figure 2
B
C
D
E
I
I
I
I
A
Cam Lock Screw
STEP 2
Attach Plinths (I) to Plinths (H) with Cam Locks.
(See Figure 2)
