Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Place Seat (A) upside down on a soft cloth.
Attach Legs (B) and (C) to Seat (A) with Flat Washers,
Spring Washers and Head Cap Bolts (long),
tightening bolts only halfway.
(See Figure 1)
Attach Stretcher (E) to Leg (B) and Stretcher (F) to Leg (C)
with Flat Washers, Spring Washers and Head Cap Bolts (short).
(See Figure 2)
A
B
C
E
F
Head Cap Bolt (short)
Spring Washer
Flat Washer
Figure 1
Head Cap Bolt (long)
Spring Washer
Flat Washer
Figure 2
